Multiple Bullet Hits

	This picture show the basic construction and materials MATERIALS (per hit) (1) 6 inch piece of latex tubing (1) piece of vinyl tubing cut to appropriate length (2) pieces of PVC pipe.  I used 1/2 inch inside diameter cut to about 1/2 long a small cable tie some string (not shown in these pictures)
	The basic method of operation is explained here, it's pretty straight forward, so I won't ramble on about it
	A poorly done example of how it would look when filled and pressurized.  To pressurize all you need to do is to fit the PVC trigger in place, insert the nozzle from an insect sprayer, (as demonstrated in Blood and Bullets for no-budget movies )  fill with air, pinch closed, remove the nozzle, then fold and fit the free end of the latex tubing into the PVC pipe.  Folding onto itself twice will help keep it in there. Once again, when you want to fire, just pull the PVC trigger quickly and the latex tubing will expel the air shooting the blood out.
	Multiple hits can be mounted on the back, legs, or wherever with the tubing run under the clothes.  The picture at the left is a basic mounting plate that would be worn on the back and hold 4 hits.  You can add as many as you need for your shot, as well as using mounting plates in other areas if need be
As always, feel free to email with questions, comments, or results. Also don't forget to check out the links for anything you could need, as well as some other tutorials (if you really want to call them that)